How to fix Vertical Blinds?

Home Improvement

If your vertical blinds are broken, the first step is to determine the specific cause. It might be a small crack or a loose cord, but you can repair the problem yourself with a few simple tools and supplies. Here are some tips. If you can’t repair the vertical blinds on your own, you can always consult a professional. If you’re unable to do it yourself, here are some DIY solutions that you can try.

Replacement of Vertical Blinds

Locate the carrier stem. The stem connects the blinds to the body of the carrier. You need to undo the spacer chain and then unscrew it from the bottom. In addition, you may need to unscrew the spacer chain from the top of the window covering. To remove the vertical blind, find the stem and twist gently until it breaks away from the body of the carrier. Once you have disassembled the vertical blind, the next step is to reattach the carrier stem.

For more information:

Once the stem is removed, you can replace the vertical blind. Depending on the exact type of carrier stem, you may have to detach the spacer chain from the headrail. Once you have the stem removed, you can attach the replacement stem. You’ll need a new spacer chain to attach the carrier stem. Make sure the replacement stem matches the existing one. You can then reinstall the vertical blind.

Methods to fixing them

If your vertical blinds aren’t rotating properly, you can try rotating them manually. To do this, find the carrier stem and twist off the clip. Then, feed the chain into the opposite direction of the problem blind. If this doesn’t solve the problem, you might need to replace the entire vertical blind. Then, the problem of vertical blinds may be fixed once and for all. If you cannot find the problem stem, you can try a DIY solution by purchasing an online tutorial.

Another way to fix the vertical blinds is to fix the slats. The slats are attached to the carrier body by a rod that runs between the two slats. In addition, you can fix a broken vertical blind slat by using a paper clip or a toothpick. It’s a good idea to keep the whole blind as clean as possible.

Broken vertical Blinds fixed with household item

A broken vertical blind can be easily fixed with a little help from a basic household item. Often, a broken panel can be fixed by placing a vane saver on both sides of the carrier body. If you can’t replace the whole panel, you can simply replace it with the other one. If both panels are broken, you can place them back together with the help of a small hand vacuum.

You can replace the worm gear by replacing it with a new one. You can find the worm gear at any hardware store or on the Internet. The other components of a vertical blind are the stem and the vane. The vane should be installed on both sides of the carrier body in the same direction as the worm gear. Then, you can try adjusting the vertical blinds again. If the problem persists, consult a professional to repair them.

Adjustment of vertical blinds after installing

Once the vertical blinds have been installed, they should be adjusted to stay straight. A lubricant may be needed to make them work again. If the blinds are not rotating, you can also try to rotate them in reverse. In some cases, the vertical blinds are not rotating correctly. This is a common problem, but you can still fix it yourself. If the problem persists, consult a professional.


The connecting chain is an essential part of a vertical blind. If it is broken, replace it. The connecting chain holds the slats in place. To replace it, you can cut the broken piece and bend it so it isn’t visible. If you can’t fix it yourself, consider buying a new set of slats. If you can’t afford to replace them, buy a new one.

Leave a Reply

Your email address will not be published. Required fields are marked *